Hydraulic balers are now widely used in industry. The main purpose of hydraulic balers is to deform steel in smelting steel. It can deform steel into various shapes for use. During transportation, it reduces the transportation burden. , while also reducing transportation costs and improving the operating efficiency of the steel plant.

The operating principle of the hydraulic baler is very simple. It uses the photoelectric principle to control the circuit. In terms of circuit work, it is a dual circuit, that is, the two circuits work together. After a series of operations such as deformation and fusion, the packaging is completed. The hydraulic baler does not require manual operation during the packaging process. It will actively package its products.

The hydraulic baler should be used correctly in use. The operator must strictly abide by the operating rules during the operation and maintain maintenance to prolong the working time of the hydraulic baler. Therefore, before using the hydraulic baler, you must first understand the hydraulic baler. The operating procedures must be explained before operation.
The daily maintenance of hydraulic balers generally includes daily maintenance and weekly maintenance, also known as daily maintenance and weekly maintenance.
1. daily insurance
(1) Check each oil pipe location for oil leakage before work.
Scrub equipment, lubricate and oil as specified. Check whether the connecting shaft pins of each part are reliable. Check whether the sound of the hydraulic baler is normal after empty work.
(2) Pay attention in class
Pay attention to the working sound, the temperature, pressure, liquid level, electrical, hydraulic pressure of the equipment, and whether it is safe and secure.
(3) Things to do after work
Turn off the switch, remove paper scraps and dirt, wipe off the oil on the guide rail surface and sliding surface of the equipment, and add oil. Clean up the work site, organize accessories and things. Fill in the shift handover record and workbench time record, and handle the shift handover procedures.
2. Zhou Lingbao
Weekly maintenance is carried out by equipment operators at the weekend. Maintenance time is: 2 hours for general equipment and 4 hours for fine, large and rare equipment.
(1) Appearance
Wipe the equipment guide rails, transmission parts and exposed parts, and clean the working area. Achieve cleanliness inside and outside, no dead corners, no rust, and a clean and tidy surrounding environment.
(2) Operating transmission
Check the technical status of each part, tighten loose parts, and adjust the cooperation gap. Check interlocks, safety devices. The sound of the transmission drive is normal, safe and reliable.
(3) Hydraulic lubrication
Clean the oil line, oil filter, and check oil in the fuel tank. Check the hydraulic system to see that the oil quality is clean, the oil passage is unblocked, and there is no leakage or scratch.
(4) Electrical system
Scrub the surface of the motor and snake skin, check the insulation and grounding, and make sure they are intact, clean and reliable.