Alligator shears are crocodile shears, which are a type of metal shears.

Alligator scissors are suitable for cold shearing of various shapes of steel and various metal structures by metal recycling companies, scrap steel plants, and smelting and casting enterprises.

safe operating procedures
1. The equipment should be operated by designated personnel, and others should not use it without training.

2. Before driving, check whether all parts are normal and whether the fasteners are firm.

3． It is prohibited to cut unannealed steel parts, cast iron parts, soft metal parts, workpieces that are too thin, workpieces with a length less than 100 mm, and workpieces that exceed the length of the scissors.

4. During operation, the human body is not allowed to come close to the transmission part and the knife edge of the equipment, and attention should be paid to the safety of surrounding people to prevent the material from rising and injuring people. When cutting, the material should be cut as close to the inside of the knife as possible. When cutting short materials, do not use hand-held workpieces to feed materials, but use clamps to feed materials.

5. When the equipment is running, operators are not allowed to leave their posts without authorization. When finishing work or leaving their posts temporarily, the power supply should be cut off. At the same time, they are not allowed to make repairs or touch moving parts with their hands while the machine is running. It is strictly forbidden to use hands or feet to press materials in the material box.

6: Each lubricating part of the machine should be filled with lubricating oil at least once per shift as required.