Four-point safety operating procedures for hydraulic balers:
1. The materials used to build the hydraulic baler must be inspected and qualified. The frame rods, connectors and fasteners of the hydraulic baler that have deformation, cracks and other defects are prohibited from use. The fasteners and connectors of the hydraulic baler must not be used. Welding method correction.
2. The foundation of the hydraulic baler must be flat, compact, and solid, and its metal base plate must be flat without any deformation. When the ground is soft, a sweeping rod or pad must be used to increase the stress surface and increase stability. sex.
3. All hydraulic balers must be set up in accordance with relevant standards and regulations (hydraulic balers must be horizontal and vertical, and the span and spacing must meet the standard requirements). No matter what height the hydraulic baler is set up to, instability is not allowed.
4. The springboard on the hydraulic baler must be laid neatly, and the width and length should be consistent (except for special parts). The springboard on any hydraulic baler must be fixed firmly, and there must be no large holes on the channel surface (except for special parts).

Nowadays, the degree of automation of process flow is getting higher and higher. Nowadays, automation technology accounts for more than 50% of the baler production line, and many use computer planning and mechatronics control to improve productivity, equipment flexibility and flexibility, and add manipulators to complete complex baler movements.