Gantry shears are used for shearing various metal plates. They are ideal equipment for charge handling in steel rolling mills, non-ferrous metal plants and smelting plants.

maintainance
1. Operate strictly in accordance with the operating procedures.

2. Before starting the machine, add lubricating oil regularly, at fixed points and quantitatively according to the lubrication chart. The oil should be clean and free of sediment.

3. The machine tool must be kept clean at all times and the unpainted parts must be coated with anti-rust grease.

4. The lubricating oil in the motor bearings should be replaced and refilled regularly, and the electrical parts should be regularly checked to see if they are working normally, safely and reliably.

5. Regularly check whether the V-belt, handle, knobs, and buttons are damaged. If the wear is serious, replace it in time and report spare parts for replenishment.

6. Regularly check and repair switches, insurances, and handles to ensure they work reliably.

7. 10 minutes before get off work every day, lubricate and scrub the machine tool.

8. Non-designated personnel are strictly prohibited from operating the equipment. Normally, the machine must be stopped when the person leaves the machine.